AC Installation and Replacement in Georgetown, TX
Georgetown HVAC Services offers AC installation in Georgetown, TX, with a Manual J load calculation on every job and a free estimate. Call (737) 221-4420 and we will help you decide if replacing your system makes sense at all.
Repair or Replace? Start Here
Nobody should buy a new air conditioner just because a salesperson suggested it. We look at the condition of your current system first, and then we tell you what we would do.
One common shortcut is the $5,000 rule. Multiply the age of the unit by the repair cost, and compare the result to 5,000.
A result above 5,000 points toward replacement. A result below it points toward repair.
Treat this as a rule of thumb, not a verdict. It ignores the condition of your ducts, your plans for the home and the number of past failures.
These signals help us fill in the rest of the picture:
| Signal | Leans toward repair | Leans toward replacement |
|---|---|---|
| Type of failure | A single small part, such as a capacitor | A failed compressor or a major coil leak |
| Repair history | First problem in a long while | Repeat failures in recent seasons |
| Refrigerant | R-410A or R-454B | Older R-22, a refrigerant phased out of new production |
| Comfort | Rooms stayed comfortable until the failure | Rooms stay uneven or humid when it runs |
| Your plans | You may sell or move soon | You plan to stay and want lower running costs |
If a repair is the sensible answer, we will say so and point you to our AC repair team. We do not do pushy upselling, and a written quote for one job never obliges you to buy another.
How We Size a System With Manual J
Size is about cooling capacity, not the physical size of the cabinet. A rough guess from floor area alone can miss a lot.
Manual J is the standard load calculation for homes. It estimates how much heat your building gains and loses, and we run one on every installation.
Our calculation looks at details like these:
- Floor area and ceiling height
- Insulation levels in the walls and attic
- Window size, type and direction
- Air leakage through the building
- Ducts in unconditioned space
- The number of people in the home
Central Texas summers regularly pass 95 degrees F, and winters are mild with occasional cold snaps. The calculation accounts for that climate, so the result fits your building.
What a wrong size can do
An oversized unit can cool the air quickly and then shut off. Those short cycles may leave the home clammy, because the system removes less moisture.
An undersized unit can run for long stretches and still fall behind. That extra run time may add wear and raise your electric bill.
The size of your old unit is only a clue. Your home may have new windows, more insulation or an addition since that unit went in.
SEER2 in Plain Words
SEER2 is an efficiency rating for cooling. A higher number means the system uses less electricity for the same seasonal cooling.
The rating comes from a test designed to reflect real ductwork more closely than the older SEER test. For that reason, a SEER and a SEER2 number are not directly comparable.
A higher rating usually costs more up front. Your own savings depend on your electric rate, your usage, your ducts and your thermostat habits.
We will not promise a savings figure. We will show you the rating on each option, so you can weigh it against the quote.
Good, Better and Best Options
Every new system quote from Georgetown HVAC Services includes good, better and best options. The labels describe a step up in features, not a sales ladder.
The exact equipment varies by home and by manufacturer. In general terms, the steps often look like this:
| Option | Typical compressor | How it tends to feel | Often suits |
|---|---|---|---|
| Good | Single-stage, on or off | Dependable cooling at full output | A solid replacement on a sensible budget |
| Better | Two-stage, low and high | Longer, gentler cycles with better moisture control | Homes with uneven rooms or humidity complaints |
| Best | Variable-speed | Fine output control and steady temperatures | Owners focused on comfort and efficiency |
Your written flat-rate quote lists what each option includes. You can compare them side by side, and you choose the one that fits.
Which brand should you buy?
The honest answer is that fit and installation quality matter a great deal. A well-sized system installed with care can outperform a pricier one installed poorly.
We are a Bryant dealer, and our brand specialties are Carrier, Lennox and American Standard. We also work with Daikin, Mitsubishi Electric, Goodman, Rheem and Trane.
Some homes need something other than a standard central system. Rooms without ductwork may suit ductless mini-splits, and you can also compare a heat pump system.
Paying for a New System
Financing is available for new systems and major upgrades through third-party lenders, for qualifying customers. Our financing options page explains how it works, and your free estimate comes first.
Checks Before We Call It Done
A new system should prove itself before we leave. We measure airflow, temperature split and refrigerant charge on the finished installation.
Then we walk you through the system and its thermostat. Georgetown HVAC Services backs the work with a 100% satisfaction guarantee. Arthur Thomas, our owner and lead technician, brings 15 years of hands-on experience.
Frequently asked questions
How do I know what size AC my home needs?
We find out with a Manual J load calculation, which we run on every installation. It accounts for floor area, insulation, windows, air leakage, ducts and occupants, which floor-area shortcuts can miss. The result tells us what capacity your home needs before we recommend any equipment or write your quote.
What is the $5,000 rule for AC replacement?
It is a general rule of thumb that multiplies the age of the unit by the repair cost. A result above 5,000 points toward replacement, and a result below it points toward repair. We use it only as a starting point, because repair history, refrigerant type and your plans also matter.
Is a higher SEER2 rating worth paying for?
It depends on your usage, your electric rate and how long you plan to stay in the home. A higher rating means less electricity for the same cooling, but it usually costs more up front. We show the rating on each good, better and best option, so you can compare them against the price.
Is the estimate for a new air conditioner really free?
Yes, estimates on installations and replacement quotes are free. We look at your current system, run the numbers for your home and give you a written flat-rate quote before any work starts. We do not pressure anyone to sign on the spot, and you can take time to compare your options.
Do I need to replace my indoor unit along with the outdoor unit?
Often the indoor and outdoor sections work as a matched pair, so replacing both is a common recommendation. The right answer depends on the age, condition, refrigerant and compatibility of your existing equipment. We inspect what you have and explain the reasoning on your written quote.
Do you install AC systems for commercial properties?
Yes, we work with homeowners and light-commercial property owners. The approach stays the same for both, with a load calculation, written options and a flat-rate quote before any work starts. Tell us about the building and its use when you call, and we can plan a free estimate.
Get a Free Estimate on a New AC
Call Georgetown HVAC Services at (737) 221-4420 to schedule your free estimate. We start with a Manual J load calculation and written good, better and best options.